Dental practice

Tracking dental lab work so appointments aren't wasted

A lab work tracking routine for dental practices: logging cases, due dates, checks before fit appointments, MHRA statements and late work.

Ava research teamPublished 6 min read

On this page
  1. The cost of a fit appointment without the work
  2. The legal basics: custom-made devices
  3. A tracking routine that works
  4. What to record in the lab book
  5. Booking rules for fit appointments
  6. When the work is late or wrong
  7. Digital scans, couriers and shared labs
  8. Why lab delays affect claims and UDAs
  9. Measuring lab performance
  10. Example: from weekly surprises to almost none
  11. Frequently asked questions
  12. References

Key takeaways

  • Most wasted fit appointments come from one missing check: confirming the work has arrived two working days before the appointment.
  • Log every case when the impression or scan is taken, with the lab, due date and fit appointment side by side.
  • Custom-made dental appliances are medical devices; the prescribing dentist must tell the patient they can request the statement of manufacture.
  • Late lab work delays course completion, and therefore the claim, so it affects UDAs as well as patients.

The cost of a fit appointment without the work

Every practice has seen it: the patient arrives for a crown fit, has taken time off work, is in the chair, and the box from the lab is not there. Or it is there, but it is the wrong shade, or for the wrong tooth. The slot is wasted, the patient is annoyed and the course of treatment stays open for another fortnight or more.

Lab work usually belongs to Band 3 NHS courses, the most expensive for paying patients at £332.10[1], or to private treatment, where expectations are higher still. Clinician time is costly too: typical dentist pay runs from £55,000 for a starter to £117,000 for an experienced dentist[2], and a dental nurse is in the room for every slot, with typical pay of £25,000 to £39,000[3]. A wasted fit appointment burns all of that time and moves the course further from completion.

NHS dental patient charges in England, 2026/27Band 3 courses include laboratory-made items such as crowns, bridges and dentures
NHS dental patient charges in England, 2026/27Column chart. Band 1: £27.9; Band 2: £76.6; Band 3: £332.1.£0£100£200£300£400Band 1: £27.9£27.9Band 1Band 2: £76.6£76.6Band 2Band 3: £332.1£332.1Band 3NHS dental patient charges in England, 2026/27Column chart. Band 1: £27.9; Band 2: £76.6; Band 3: £332.1.£0£100£200£300£400Band 1: £27.9£27.9Band 1Band 2: £76.6£76.6Band 2Band 3: £332.1£332.1Band 3

Source: NHS (nhs.uk), 2026[1]

Show the data
ItemValue
Band 1£27.9
Band 2£76.6
Band 3£332.1

Crowns, bridges, dentures, veneers, splints and orthodontic appliances made for a named patient are custom-made medical devices. The MHRA says all medical devices, including custom-made dental devices, must be registered with it, and that a dentist or dental technician who designs and produces a dental device from raw materials is likely to be a manufacturer[4]. Most practices are not manufacturers, but they must work with labs that meet the rules.

For all but the lowest-risk devices, the manufacturer must provide a statement with the device, and the statement must be available to the patient[4]. The MHRA expects the dentist who prescribes and fits the appliance to tell the patient that they may request the statement of manufacture, and says that failing to offer it, or it not existing, would be a breach of the regulations[4]. Build this into the tracking routine so it happens every time.

Keep the lab's statement with the patient record and add a line to the fit appointment notes confirming the patient was told they can have a copy.

A tracking routine that works

  1. Log the case at the impression or scan

    The nurse records the patient, the item, the lab, the date sent, the lab's promised return date and the fit appointment date in one place before the patient leaves.

  2. Book the fit with a buffer

    Book the fit appointment at least two working days after the lab's promised return date, never on the same day.

  3. Check two working days before the fit

    A named person checks every fit appointment for the next two working days against the lab book. If the work has not arrived, call the lab that morning.

  4. Check the work on arrival

    Open the box, match the prescription, patient name, tooth and shade, look for damage and confirm the statement of manufacture is included. Mark the case received.

  5. Reschedule early if needed

    If the lab cannot deliver in time, call the patient the day before at the latest and rebook. A day's notice is far better than a wasted trip.

  6. Close the case after the fit

    Record the fit, file the statement, note whether the patient was told about it and mark the course ready for completion and claiming.

What to record in the lab book

Minimum fields for a dental lab tracking log
FieldWhy it matters
Patient name and record numberAvoids mix-ups between patients with similar names
Item, tooth and shadeLets the receiving check be done against the prescription
Lab name and contactSpeeds up chasing when work is late
Date sent and promised return dateShows lab turnaround and lateness
Fit appointment date and clinicianDrives the two-day check
Date received and checked byProves the check happened
Statement of manufacture filedEvidence for MHRA requirements and patient requests
Outcome: fitted, remake, adjustedTracks quality and remake rates per lab

A spreadsheet or the lab module in your practice software both work. What matters is that there is one list, that everyone uses it and that someone looks at it every day.

Booking rules for fit appointments

  • Never book a fit before the lab's promised date plus a buffer.
  • Ask the lab for realistic turnaround times for each type of work and update them when they change, for example around holidays.
  • Avoid booking fits on the first working day after a bank holiday, when courier delays are common.
  • Allow longer for complex work, such as implant restorations or full dentures with try-in stages.
  • Book the try-in and the fit as separate stages for dentures, each with its own check.
  • Flag fit appointments in the diary so reception can see at a glance which slots depend on lab work.

When the work is late or wrong

Tell the patient as early as possible and be honest. A script that works: 'I'm calling about your appointment tomorrow. The lab has told us your crown will not be ready in time, and we do not want you to make a wasted journey. Can we move you to Thursday next week? I'm sorry for the change.' Offer a review if the temporary restoration is uncomfortable.

Record each late or incorrect case against the lab. Review the figures with the lab every quarter. Most labs want to keep a good client and will respond to clear evidence, such as on-time rates and the number of remakes, rather than to general complaints.

Digital scans, couriers and shared labs

Digital impressions remove the courier journey for the impression itself, but not for the finished item, and they add new failure points: a scan sent to the wrong lab account, a file that failed to upload, or a prescription missing the shade. The tracking routine still applies. Log the case when the scan is sent, check that the lab has acknowledged it the same day and keep the promised return date next to the fit appointment.

  • Confirm the lab has received each digital scan and prescription within one working day.
  • Keep courier collection times on the lab book so late-afternoon cases are not missed.
  • Where several clinicians use different labs, record the lab per case rather than per clinician.
  • Agree with each lab how it will tell you about delays, ideally before the promised date rather than on it.
  • Review the lab list once a year and remove labs you no longer use from the practice software.

The same discipline helps private work, where patients often pay deposits and expect a fixed date. A missed private fit costs goodwill as well as time, and a clear record of what was promised and when makes any conversation with the patient or the lab easier.

Why lab delays affect claims and UDAs

An NHS course cannot be completed until the lab item is fitted, so the claim cannot be sent. Practices then have two months from the completion date to submit the FP17[5]. Lab delays therefore push Band 3 courses, worth 12 UDAs each, later in the year. In February and March, a handful of late crowns can move delivery across a year-end threshold. Include open lab cases in your monthly UDA review and chase anything that could slip past 31 March.

Measuring lab performance

  1. On-time rate: cases received by the promised date, as a share of all cases.
  2. Wasted fit appointments: fits that could not go ahead because the work was missing or wrong.
  3. Remake rate: cases returned for remake, by type of work.
  4. Statement compliance: cases with the statement of manufacture filed.
  5. Average turnaround: days from sending to receipt, by type of work.

Most NHS courses are simple Band 1 courses, 61% of the national total in 2025/26[6], so lab work is a small share of activity but a large share of complaints and rebookings. A short monthly report keeps attention on it.

Example: from weekly surprises to almost none

Example: a fictional four-surgery practice records eleven wasted fit appointments in a quarter, all because work had not arrived or was wrong. The manager introduces the lab book, the two-working-day check and a buffer rule. The nurse team takes turns doing the morning check. In the next quarter there is one wasted fit, caused by a courier failure that the morning check caught too late to rebook. The practice also finds one lab accounts for most late cases and agrees a new turnaround standard with it.

Frequently asked questions

Is a dental crown a medical device?

Yes. Crowns, bridges, dentures and similar items made for a named patient are custom-made medical devices, and the manufacturer must be registered with the MHRA.

Do we have to give patients the statement of manufacture?

The dentist who prescribes and fits the item must tell the patient they may request it and provide it on request.

How far ahead should we check lab work?

Check every fit appointment two working days ahead. That leaves time to chase the lab or rebook the patient.

Does a late crown affect our UDAs?

It delays completion of the course and therefore the claim. Late cases near year end can move delivery into the next year.

References

  1. NHS (nhs.uk) (2026). Understanding NHS dental charges (opens in a new tab) ↑

  2. National Careers Service (GOV.UK) (2026). Dentist job profile (opens in a new tab) ↑

  3. National Careers Service (GOV.UK) (2026). Dental nurse job profile (opens in a new tab) ↑

  4. GOV.UK (Medicines and Healthcare products Regulatory Agency) (2024). Freedom of Information request (FOI 22/740): custom-made dental devices (opens in a new tab) ↑

  5. NHS Business Services Authority (n.d.). How long do I have to submit an FP17 or FP17O? (opens in a new tab) ↑

  6. NHS Business Services Authority (2026). Dental statistics - England 2025/26 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo