Key takeaways
- Start with the number of new patients needed just to stand still: active patients multiplied by annual attrition, divided by twelve.
- Add growth on top only if there is clinical capacity for new patients' first-year treatment, not just their first appointment.
- Work back through the enquiry funnel to see how many enquiries the target needs, and fix conversion before buying more leads.
- Local access varies widely, so check demand in your own area before setting an ambitious target.
Why most new patient targets are guesses
Many practices set a new patient target by picking a round number that feels ambitious. The result is predictable: either the target is too low to replace patients who drift away, or it is so high that new patients wait weeks for treatment and the existing list is squeezed out. A useful target is worked out, not chosen. It starts from how many patients you lose, adds the growth you want, and checks both against the chair or room time you actually have.
Local demand sets the ceiling. Across England, the share of adults seen by an NHS dentist in the previous two years ranged from 25% in one ICB area to 53% in the best-performing area[1], and CQC-registered dental locations range from 37 per 100,000 people in the best-supplied area to 15 per 100,000 in some rural areas[2]. A practice in an under-served area may have more demand than it can meet; one in a crowded market has to work harder for each new patient.
Source: Care Quality Commission, 2026[1]
Show the data
| Item | Value |
|---|---|
| Lowest ICB area | 25% |
| Highest ICB area | 53% |
Step 1: the number that keeps you level
Every list loses patients: people move away, change practice, stop attending or die. The first part of the target is simply replacing them. Define an active patient consistently, for example anyone seen in the last 24 months, and measure the share of active patients at the start of last year who were not seen again or formally left.
Count active patients
Use the same definition every time, and take the count on the same date each year.
Measure annual attrition
Patients active at the start of the period who lapsed or left during it, as a share of the starting number.
Calculate the replacement need
Active patients multiplied by attrition gives the yearly number to replace; divide by twelve for a monthly figure.
Check by segment
Attrition is often much higher for emergency-only patients than for plan members or families, so look at each group.
Look at why patients lapse as well as how many. A short call or message to a sample of lapsed patients each quarter often shows that a reminder was missed, a favourite clinician left or a bill came as a surprise. Each of those is cheaper to fix than replacing the patient.
Step 2: add growth only where capacity exists
New patients use more chair time than established ones in their first year: a longer first examination, radiographs, hygiene to catch up and often a course of treatment. Before adding growth to the target, estimate how many clinical hours each new patient needs in their first three to six months and check the diary can absorb them without pushing existing patients' recalls back.
- First visit length, including history, examination and radiographs.
- Average treatment hours in the first six months for new patients, from your own records.
- Hygiene appointments needed in the first year.
- Clinician availability: which dentists, hygienists and therapists have space, and on which days.
If capacity is tight, the right growth target may be zero until a new clinician starts or utilisation improves. Taking on patients you cannot treat promptly damages reputation and drives the next wave of attrition.
Worked example: a fictional mixed practice
Example: Southgate Dental, a fictional practice, has 5,000 active patients and loses 14% a year, about 700 patients, so it needs roughly 58 new patients a month just to stay level. The owners want to grow the active list by 300 over the next year, adding 25 a month, for a total target of about 83 new patients a month.
Example: each new patient needs about 45 minutes for the first visit and an average of 1.5 hours of treatment and hygiene in the first six months, so the target needs about 190 clinical hours a month. The diary shows 120 spare hours. The practice sets a target of 70 a month for the first quarter, recruits a part-time hygienist to free dentist time, and raises the target to 83 once the hygienist starts. The plan is honest about the constraint rather than promising growth the diary cannot deliver.
| Line | Calculation | Result (Example) |
|---|---|---|
| Annual lapses | 5,000 active x 14% | 700 |
| Monthly replacement need | 700 / 12 | 58 |
| Monthly growth | 300 / 12 | 25 |
| Monthly target | 58 + 25 | 83 |
| Clinical hours needed | 83 x 2.25 hours | about 190 |
| Spare hours available | From the diary | 120 |
Step 3: work back through the enquiry funnel
A target of 83 new patients does not mean 83 enquiries. Some enquirers never book, some book and do not attend, and some attend once and never return. Measure each stage for the last three months: enquiries, appointments booked, first appointments attended and patients returning for a second visit within six months. Divide the target by each conversion rate to see how many enquiries are needed.
Fix conversion before buying more leads. Patients who cannot get an answer quickly often give up: among adults without a dentist who could not get an urgent NHS appointment, taking no further action was the most common response, at 69.0%[3]. Private patients behave similarly. An enquiry answered the same day, with a clear next appointment and price information, converts far better than one returned three days later.
- Answer phone, web and social enquiries within one working day, ideally within an hour.
- Offer a specific appointment time in the first reply rather than asking the patient to call back.
- Send a confirmation and reminder for every first appointment.
- Book the second visit before the patient leaves the first.
- Track conversion by source, because enquiries from search, referrals and the NHS website behave differently.
Where new patients come from
Online search dominates discovery. People without a dentist who sought an urgent NHS appointment most often found a practice through an online search (30.9%) or the NHS website (25.5%), and only 3.5% were recommended one[4]. Keep your website, NHS profile and online listings accurate, including whether the practice is NHS, mixed or private and whether it is taking new patients.
Private demand is broad. In 2026, 85% of 25 to 34-year-olds said they would consider going private for healthcare[5]. Younger patients are more likely to search and book online, so a target that relies on them depends on an easy online booking route and quick responses.
NHS contracts and private books
For NHS dental contracts, the new patient target also has to fit the contract. Taking on more NHS patients than the contract can fund leads to over-delivery that may not be paid, while under-recruiting risks missing contract targets. Plan NHS new patients against the units of dental activity still available in the contract year, and agree with the commissioner how any local new patient schemes or premium payments apply.
For private and mixed practices, set separate targets for plan members, pay-as-you-go patients and treatment-only referrals, because each has different capacity needs and lifetime value. A target that only counts heads can hide a shift towards patients who need a lot of chair time but rarely return.
Common mistakes
- Counting enquiries or bookings rather than attended first visits.
- Setting the same target every month, even though enquiries and capacity vary with the season.
- Ignoring attrition, so the list shrinks while the practice celebrates new patient numbers.
- Promising quick first appointments that the diary cannot deliver, which turns new patients into complaints.
- Running offers that attract one-off visitors rather than patients who will return.
Reviewing the target
- Track new patients attended each month against the target, not enquiries.
- Track how many new patients return for a second visit within six months.
- Recalculate attrition every six months.
- Review spare clinical hours before raising the target.
- Adjust the target when a clinician joins, leaves or changes sessions.
A new patient target is only met when the patient becomes a regular. Count second visits, not first bookings, as the real measure of success.
Frequently asked questions
How many new patients does a dental practice need each month?
At least enough to replace patients who lapse: active patients multiplied by annual attrition, divided by twelve. Add growth on top only where there is clinical capacity for new patients' first-year treatment.
How do we calculate patient attrition?
Take patients active at the start of a year and count how many were not seen again within your active definition, such as 24 months, or formally left. Divide by the starting number.
Should we spend more on marketing to hit the target?
Check conversion first. If enquiries are answered slowly or first visits are not followed by a second booking, fixing that is cheaper and more effective than buying more enquiries.
References
Care Quality Commission (2026). State of Care 2025/26: dental (opens in a new tab) ↑
Care Quality Commission (2026). State of Care 2025/26: dental (opens in a new tab) ↑
Office for National Statistics (2026). Experiences of NHS healthcare services in England: September 2026 (opens in a new tab) ↑
Office for National Statistics (2026). Experiences of NHS healthcare services in England: September 2026 (opens in a new tab) ↑
Independent Healthcare Providers Network (IHPN) (2026). Support for using private healthcare now found across the political spectrum, new report shows (opens in a new tab) ↑